3D SCAN - I, Robot control panel
I ROBOT Control panel -RAw scan
irobot_alligned_final_v2s_small.stl | |
File Size: | 42106 kb |
File Type: | stl |
This is a 3D scan of an I, Robot control panel. This was scanned with an Einstar Shinning 3D scanner at a resolution of 0.2mm and using AESUB Blue scan spray. Initially, 4 individual scans were made and stitched back together. There was no reverse engineering done on the control panel. THIS IS A RAW SCAN. Exterior of the donor panel was excellent. Under side of the panel had some chipping near the top edges. Additionally, there is an abrasion on the underside as well. All can be seen in the 3D model.
|
Special thanks to the contribution by: Chris for the Pac-Man cocktail plans
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED January 16, 2024
|