Arcade - Arcade Cabinets - Atari - Liberator
Cabinet measurements provided by:
Has a cabinet been cut from drawings: No - pending
3/4" Plywood base and support structure
3/4" Particle board with Vinyl
NOTE: Please read the FAQ about material selection.
Estimate Cabinet Accuracy = 85%
What does Cabinet Accuracy mean?
NOTE: Drawings are missing the back door.
Picture of finished cabinet
Materials used for construction: (not including tools, bits, CNC, etc...)
VCarve Pro drawinG
VCarve Pro (Verson 8.024) file
Note: .CRV files do not contain tool paths.
DXF File (CAD file.)
Files to print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Cabinet Art Files
Currently not available
The purpose of the reference photos are to assist with assembly. They allow for a visual reference on how joints are assembled and edges overlap.
Drawing specific notes
3/11/2017 - updated plans with minor corrections to marquee area. Added printable plans as well.
Last updated 3/11/2017
Special thanks to the contribution by: SuperFili for verification / build of MKII cabinet
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED 10/20/2017