Arcade - Arcade Cabinets - Atari - Centipede
Cabinet measurements provided by:
Spot verified by:evanc
NOTE: Spot checks are when 6-10 key measurements are checked against the original cabinet. These measurements are made to get a "feel" of how accurate the plans are. By having the plans spot checked, it does not certify their accuracy, but provides an additional level of comfort about the accuracy of the plans. This is usually performed when the plans are coming from an unknown source.
Has a cabinet been cut from drawings: No
3/4" Particle Board
3/4 in Plywood
1 sheet of 1/2" plywood
1 sheet of 3/4" plywood
3 sheets of 3/4" melamine
Estimate Cabinet Accuracy =80%
What does Cabinet Accuracy mean?
Areas of variation: None identified
Photo from www.klov.com
Picture of finished cabinet - N/A
VCarve Pro Drawing
VCarve Pro (Version 8.024)
Note: .CRV files do not contain tool paths.
DXF File (CAD file.)
Files to Print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 40" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Cabinet Art Files
Currently not available
Special thanks to evanc for the spot checks and reference photos for Centipede.
Drawing specific notes
11/7/2016 - Added printable drawings for the cabinet.
Last updated 11/7/2016
Special thanks to the contribution by: Dave (UK) for building an Atari Asteroids
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED June 19, 2020