Arcade - Arcade Cabinets - Atari - Quantum
Cabinet measurements provided by:
Has a cabinet been cut from drawings: No
3 sheets of 3/4" Melamine or Particle board w/ vinyl
1 sheet of 3/4" Plywood for base, monitor support structure, and blocking
Estimate Cabinet Accuracy 85%
What does Cabinet Accuracy mean?
An update to the drawings will be performed when the cabinet is cut.
Areas of variation:
Picture of finished cabinet - N/A
VCarve Pro drawing
VCarve Pro (Verson 8.024) file
Note: .CRV files do not contain tool paths.
DXF File (CAD file.)
Files for Print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Cabinet Art Files
Currently not available
Drawing specific notes
More to follow once the cabinet is cut... but the placement of the "Key" seem critical. All other internal structure is based upon this placement. If the key is off, it may be very difficult to get everything else to line up.
Special thanks to Scott S for assisting with the "key" design and corrections.
Last updated 5/23/2016
Special thanks to the contribution by: squall280 for verification of Q*bert cabinet measurements
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED 1/12/2018