|
Arcade - Arcade Cabinets - Konami - G.I. Joe
G.I. JOE (4 Player)
Misc Information
Cabinet measurements provided by: classicarcadecabinets@gmail.com on 4/14/2015 for TMNT Has a cabinet been cut from drawings: YES (no control panel) Construction type: Particle board 3/4" Plywood 3/4" base and monitor structure Materials needed 3x 3/4"Melamine (black) 4'x8' 1x 3/4" Plywood for base, monitor structure and control panel base 4'x8' NOTE: reinforced feet should be used due to the weight of the cabinet Estimated Cabinet Accuracy: 95%
NOTE: The G.I. Joe cabinet is shared with the TMNT single speaker cabinet.
Areas of Variation Blocking - The blocking (support structure for joining cabinet components) was drawn for use with dadoes. This the makes assembly much easier as far as spacing and marking (if the cabinet is to be cut with a CNC). Control Panel - contains no joystick and button placement. I do not have an art set to compare with the complete TMNT drawings. |
Sketch Up
4-player Konami conversion class. Cabinet accurate to within 1". No sideart. by Gozer.
https://3dwarehouse.sketchup.com/model.html?id=e35491b0966cb35dd06e6be4f8954ac 
|
Pictures of finished cabinet
VCarve Pro Drawing
VCarve Pro (Version 8.0.24) file
|
Control Panel
|
Note: .CRV files do not contain tool paths
|
| ||||
DXF File (CAD file.)
|
| ||||
Files to print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
| tmnt_4p_corrected.pdf |
Cabinet Art Files
No art files are currently available.
Drawing specific notes
This is just a note for the ventilation on the cabinet / power supply. The cabinet has a fan that is mounted in the base of the cabinet and blows air out of the bottom of the cabinet. You need to make sure you cut the sides of the cabinet to allow for the escaping air.
Comments
11/5/2016 - Corrections made to page
8/15/2016 - Updated the control panel box measurements.
Last updated 11/5/2016
|
|
Special thanks to the contribution by: Patrick (KLOVer P0rgy8190) for the 720 plans
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED August 7, 2023
|
|