Arcade - Arcade Cabinets - Midway - Ms. Pacman

Ms. Pacman

Misc. Information

Cabinet measurements provided by: 


Has a cabinet been cut from drawings: No

Construction type:

3/4" Plywood



Estimate Cabinet Accuracy: 85%

What does Cabinet Accuracy mean?
 Areas of variation


Monitor mountings - From memory, the monitor had metal hardware for mounting. In the drawings, a wooden mount was included for the monitor (both 19" CRT and LCD with VESA 100) and blocking was added to support the monitor mounts. The placement of the blocking for the monitor mounts may be off due to the shape of the monitor shroud.  If you have original hardware, the mounts and blocking are not needed. 


Wheels - Plans are missing wheel mounts on the back of the cabinet.

Sketch Up

Reproduction artwork kit and custom pink t-molding installed on standard Ms.pac style cab. Accurate to within one inch. By Gozer.

https://3dwarehouse.sketchup.com/model.html?id=2a65c8fcaac7eee371d096a6914e7333

Pictures

No cabinets have been cut from these drawings.

VCarve Pro Drawings

VCarve Pro (Version 8.024) file

ms_pacman.crv
File Size: 595 kb
File Type: crv
Download File

DXF File (CAD)

ms_pacman.dxf
File Size: 4773 kb
File Type: dxf
Download File

Files to Print

The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet.  I have only included the side panels and any other panels that may be more difficult to cut.
mspac_side_panel.pdf
File Size: 5 kb
File Type: pdf
Download File

Cabinet Art Files

Art files are currently not available.

Drawing specific notes

The drawings are missing the cutouts for the rear wheels. The "problem areas" are highlighted in red below.
The blocking and monitor mounts were added to allow you to mount your monitor without the specific metal pieces. If you have these parts, the following areas of the plans to not need to be cut. 

Comments

Please add any comments for the drawing below.  Thank you.
Last updated 10/18/2018