Arcade - Arcade Cabinets - Gottlieb - Reactor
Cabinet measurements provided by:
Has a cabinet been cut from drawings: No - pending
3/4" Plywood : base
NOTE: Please read the FAQ about material selection.
Estimate Cabinet Accuracy = 80%
A cabinet will be cut from these plans in the next few weeks. Unless you are in a hurry, please wait until the plans can be verified. Drawings contains lots of angles and many easy places to make mistakes in the drawings.
What does Cabinet Accuracy mean?
Dedicated Gottlieb cabinet with best fit on all arts. Xylosesame for the coin door. Accurate to within .5 inches. Thanks to GaryMcT for the measurements. by Gozer.
Picture of finished cabinet
Materials used for construction: (not including tools, bits, CNC, etc...)
VCarve Pro drawing
VCarve Pro (Verson 8.020) file
Note: .CRV files do not contain tool paths.
DXF File (CAD file.)
Files to print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Cabinet Art Files
Currently not available
Drawing specific notes
Please add any comments for the drawing below. Thank you.
Last updated 10/13/2015
Special thanks to the contribution by: squall280 for verification of Q*bert cabinet measurements
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED 12/7/2017