Arcade - Arcade Cabinets - Cinematronics - Star Hawk
Cabinet measurements provided by:
Spot verified by:
Has a cabinet been cut from drawings: No
3/4" particle board
3/4" plywood for the base base
3/4" pine for all blocking
Estimate Cabinet Accuracy = 83%
What does Cabinet Accuracy mean?
Areas of variation:
Plans are very detailed and contain alot of information. The problem is that the donor cabinet was falling apart and some components were missing. There are two boards that go across the from of the cabinet between the base and the front panel that were missing. While they are simple rectangles to cut, they will have to be fit at time of assembly. Additionally, the back door was not available. This is the reason for the slightly lower score on the plans.
Photo from http://www.klov.com
Picture of finished cabinet - N/A
VCarve Pro Drawing
VCarve Pro (Version 8.511)
Note: .CRV files do not contain tool paths.
DXF File (CAD file.)
Files to Print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 48" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Cabinet Art Files
Currently not available
Drawing specific notes
Last updated 1/9/2017
Special thanks to the contribution by: squall280 for verification of Q*bert cabinet measurements
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED 12/7/2017