Arcade - Arcade Cabinets - Rock-Ola - Pioneer Balloon
Pioneer Balloon
Misc. Information
Cabinet measurements provided by: [email protected] Has a cabinet been cut from drawings: Yes Construction type: 3/4" MDF: side panels 1/2" MDF: Speaker panel 3/4" Particle board: All other components 1" Pine: (solid wood) skids for the base of the cabinet NOTE: Please read the FAQ about material selection. Estimate Cabinet Accuracy = 95% What does Cabinet Accuracy mean? NOTE: The plans are shared between the following games: Eyes Fantasy Jump Bug Nibbler Pioneer Balloon Warp Warp |
Http://www.klov.com
|
Picture of finished cabinet
Finished cabinet picture provided by CNC PUrsuits at http://www.cncpursuits.com/#!services-arcade-cabinets/c1xqu
The build pictures provided below are by dungeonmastr on KLOV.
Build thread can be found here ... http://forums.arcade-museum.com/showthread.php?p=3283366#post3283366
VCarve Pro drawing
VCarve Pro (Verson 8.024) file
Note: .CRV files do not contain tool paths.
rockola_v2.crv | |
File Size: | 2291 kb |
File Type: | crv |
DXF File (CAD file.)
rockola_v2.dxf | |
File Size: | 14431 kb |
File Type: | dxf |
Files to Print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
rockola_side_panel.pdf | |
File Size: | 33 kb |
File Type: |
Cabinet Art Files
Currently not available
Drawing specific notes
For some reason, I really struggled with how to draw out this cabinet. Overall, I feel the drawings are accurate... but there are some variations in the drawing from original.
1. The original cabinet was designed and assembled using mortise and tenon joints. My donor cabinet was not to be sacrificed, so I could not destroy the cabinet to get these measurements. Much of the blocking remained the same, but the fundamental structure of the cabinet assembly has changed.
2. The monitor mounting, to include frame and hardware was a struggle. The monitor mounts to two wooden slats that are held together with metal bars. These slats are then bolted to the cabinet using an L bracket. the drawings have the drill holes for the original hardware and blocking and a modified frame if you do not have the donor cabinet hardware.
1. The original cabinet was designed and assembled using mortise and tenon joints. My donor cabinet was not to be sacrificed, so I could not destroy the cabinet to get these measurements. Much of the blocking remained the same, but the fundamental structure of the cabinet assembly has changed.
2. The monitor mounting, to include frame and hardware was a struggle. The monitor mounts to two wooden slats that are held together with metal bars. These slats are then bolted to the cabinet using an L bracket. the drawings have the drill holes for the original hardware and blocking and a modified frame if you do not have the donor cabinet hardware.
The drawing above has the drill holes for the original hardware.
|
The drawing above has the modified blocking to allow you to mount a monitor if you do not have the correct hardware. It is important to note that the blocking is stacked, for different offsets from the cabinet. This is to allow the monitor frame to slide in spot on the blocking.
|
Below is a picture of the two different monitor frames.
3. The original cabinet had solid wood skids on the bottom. These skids appeared to be made of pine and basically acted as a spacer to keep the cabinet from touching the ground. The size and width of the skids may be impact by the type of fee you are putting on the cabinet. These may need to be modified as needed.
Reference Photos (from donor cabinet)
Comments
Last updated 5/31/2016
|
Special thanks to the contribution by: Chris for the Pac-Man cocktail plans
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED September 21, 2024
|