Arcade - Arcade Cabinets - Taito - QIX Trimline Cabaret
NOTE: 2 sets of build plans from different sources
Cabinet measurements provided by:
Drawing set 1 - Sluggy from Jammaplus.co.uk
Drawing Set 2 - firstname.lastname@example.org
Has a cabinet been cut from drawings:
Drawing set 1 - Sluggy from Jammaplus.co.uk = YES - see build thread
Drawing Set 2 - email@example.com = NO
Partical Board with vinyl surface
1.25" x 1" blocking for monitor
1.5" x 2" blocking for monitor
5/8" plywood for monitor frame
Drawing Set 1 (Sluggy from Jammaplus.co.uk) Estimate Cabinet Accuracy =UNKNOWN
Drawing Set 2 (firstname.lastname@example.org) Estimate Cabinet Accuracy =78%
What does Cabinet Accuracy mean?
Drawing Set 1 Areas of variation:unknown
Drawing set 2 Areas of variation:
This was one of the ugliest cabinets with offset cuts to get everything fitting correctly in the base and front. My donor cabinet was in nice shape, so I was not able to take apart the cabinet. I think I got everything correct, but please double check if you are going to be cutting a cabinet from the plans.
Monitor orientation in the plans is incorrect. The drawings are for a horizontal monitor. Qix is vertical. Please adjust as needed.
Taito mini cabinet with SI artwork. Accurate to within one inch. by Gozer.
NOTE: Drawing incorrectly reflect a second coin door for this cabinet.
Picture of finished cabinet - N/A
Drawing Set 1 (Sluggy from Jammaplus.co.uk)
VCarve Pro Drawing Set 2 (email@example.com)
Drawing Set 1 DXF File (Sluggy from Jammaplus.co.uk)
VCarve Pro (Verson 8.024) file of Drawing Set 2 ( firstname.lastname@example.org)
Note: .CRV files do not contain tool paths.
DXF File (CAD file.) of Drawing Set 2 ( email@example.com)
Files to Print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Reference build thread for Sluggy from Jammaplus.co.uk
Cabinet Art Files
Currently not available
No reference photos are available at this time.
Drawing specific notes
This is a video of Todd's Taito trimline collection. Todd is a good guy from TNT Amusements.
Please add any comments for the drawing below. Thank you.
Last updated 1/27/2016
Special thanks to the contribution by: Drew L. for verification of the Star Castle plans, KLOVer IVANX for verification of the Moon Patrol plans and cabinet pictures and Peter L. for Track and Field.
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED 11/19/2018