Arcade - Arcade Cabinets - Exidy - Hard Hat
Cabinet measurements provided by:
Spot verified by:
Has a cabinet been cut from drawings: No
3/4" Particle Board
3/4 in Plywood
1 sheet of 1/2" plywood
1 sheet of 3/4" plywood
3 sheets of 3/4" melamine
Estimate Cabinet Accuracy = UNKNOWN
What does Cabinet Accuracy mean?
Areas of variation: UNKNOWN... SEE WARNING ABOVE
NOTE: This cabinet shares plans with the following games:
Photo from http://www.klov.com
Picture of finished cabinet - N/A
VCarve Pro Drawing
VCarve Pro (Version 8.024)
Note: .CRV files do not contain tool paths.
DXF File (CAD file.)
Files to Print
The below files are PDF documents of the plans that are printed to scale. These documents can be taken to your local print shop and printed on 36" wide media. The prints can then be applied to the wood and used as a template to cut the side panels of the cabinet. I have only included the side panels and any other panels that may be more difficult to cut.
Cabinet Art Files
Currently not available
None are currently available
Drawing specific notes
Please add any comments for the drawing below. Thank you.
Last updated 5/10/2016
Special thanks to the contribution by: William for updated Tron build
All graphics/images/cabinet designs on this site are copyrighted by the their original owners. ClassicArcadeCabinets.com makes no claim to said such rights and provides the cabinet designs for collectors and hobbyist of the original arcade coin-op machines. Images and graphics are for reference only. Any copyright holder wanting their images or reproductions removed from this site should contact us and we will immediately remove these images.
SITE LAST UPDATED September 18, 2022